Saturday, February 13, 2010

Jetstream-SC250

Jetstream-SC250


Jetstream-SC250


Jetstream-SC250

Hummer H3 V8 Kompressor

Hummer H3 V8 Kompressor


Hummer H3 V8 Kompressor


Hummer H3 V8 Kompressor

Aston Martin Lagonda




Post by: Automotive

The Aston Martin Lagonda Concept celebrates 100 years of car production under the Lagonda brand, a stunning contemporary evolution of this evocative name.

The modern Lagonda marries functionalism with luxury, through organic forms, rich materials and complex surfaces. The car is based on an advanced platform that is tailored to accommodate a broad range of future powertrains, including flexfuel, low emission diesel and hybrid systems.

The Aston Martin Lagonda Concept is a four-seat international tourer, an avant-garde luxury car that draws inspiration from the brand's illustrious past as well as the visual language of speedboat design, the spacious individualist environment of the upper class cabin and the bespoke feel of contemporary modern furniture. Inside, the four generous seats are divided into two zones, front and rear. The result is a relaxed, rich environment that envelops you in warm, tactile materials.

Marek Reichman, Aston Martin's Director of Design, describes the Aston Martin Lagonda Concept's design language as a fusion of fluid shapes mixed with hard, constructed lines. This organic, emotional approach eschews upright surfaces in favour of broad, flowing bodywork around the spacious passenger cabin.

The clear delineation between cabin, shoulder and flank is strongly reminiscent of the powerful and evocative lines of the 1930s era Lagondas, in particular the V12-engined version of the LG6. Viewed from the front of the concept, the deep, strong grille also evokes the presence and frontage of the cars from the inter-war era. The bold character lines that run along the sculpted flanks to the rear ensure the concept is planted firmly on the road. The large 22" wheels and cut-away bodywork offer exceptional ground clearance, while the concept's V12 engine delivers power through all four wheels.

A modern automotive brand must have strong core values and a broad range of abilities. The modern Lagonda will be the pre-eminent long-distance automobile, a vehicle that combines cosseting luxury with extreme functionality and technological innovation.

The Lagonda name has been an integral part of the Aston Martin story since 1947. The Aston Martin Lagonda Concept illustrates how the brand will once again stand together with Aston Martin as the perfect complement to modern performance. A Lagonda stands for functional elegance, performance, simplicity and comfort.

"Lagonda will create a new kind of customer relationship, instilling the spirit of travel, adventure and style into a single, formidable package," says Dr Ulrich Bez. "An Aston Martin demands to be driven. A Lagonda demands a destination."

Lagonda: Revival of a Luxury Brand

Aston Martin is proud to announce the return of Lagonda, one of the most iconic names in luxury car manufacturing. The intention is for Lagonda to enter the market place with a unique performance luxury product, a vehicle that combines exceptional ability with unsurpassed elegance, inside and out.

Lagonda's return signals a major expansion of Aston Martin's product line, taking the company into new and emerging markets around the world. To demonstrate the Lagonda vision, the Aston Martin Lagonda Concept has been created, a car that epitomises the intersection of craft, design and technology with Aston Martin's established high performance expertise.

The Aston Martin Lagonda Concept is an avant-garde luxury vehicle; with powerful four-wheel drive, a four-seater car that will satisfy the most discerning and demanding owner. The concept demonstrates a commitment to innovative new propulsion technologies, new materials and elegant forms.

"The Lagonda is the luxury car of the future," says Aston Martin Chief Executive, Dr Ulrich Bez, "a combination of total usability, a new form and innovative new technology and materials."

The return of Lagonda fulfils a long-term vision. Aston Martin's modern era began in 2001 with the launch of the V12 Vanquish and the construction of the award-winning headquarters at Gaydon, Warwickshire in 2003. In the years that followed, Aston Martin has launched four class-leading new products, revitalising the performance GT category and redefining automotive beauty.

Aston Martin's award-winning range, the DBS, DB9, Vantage and forthcoming Rapide and One-77, represent some of the most beautiful high performance cars ever built, refined, highly crafted and extremely well-engineered. An Aston Martin will always be a sports car; modern, exclusive and beautiful, it demands to be driven, with an exceptional character that rewards the enthusiast, both on the road and on the track. Above all, an Aston Martin creates an emotional response. It is a machine with soul.

Under the leadership of Dr Ulrich Bez, Lagonda will bring performance luxury into new markets and territories around the world. Reflecting its remarkable history, Lagonda will return to Russia, enter emerging markets in the Middle East, South America, India and China, as well as responding to demand from the dynamic, innovation-focused consumers of Europe, North America and the Far East.

Not only will Lagonda join Aston Martin in existing core markets, but the unique character of the new brand will help take the company into as many as 100 territories around the world and extend the brand to new customers. "An Aston Martin is an authentic, pure sports car," says Dr Ulrich Bez, "but Lagonda is something else, a new brand that will reach into new markets and have different values to Aston Martin."

Heritage

Lagonda is one of the great names in automotive history, a brand associated with luxury, performance, grace and exclusivity. Since the first Lagonda production car, was built 100 years ago by the American-born Wilbur Gunn, the Lagonda name has undergone several incarnations, before it soon began to excel at creating racing cars and sporting saloons.

Gunn's first car was built in his home workshop in Middlesex, England in 1909. In 1910, Gunn drove his 16/18hp Lagonda Tourer to victory in the Russian Reliability Trial, a spectacular event run by the Imperial Automobile Club of Russia as a public relations exercise for the country's nascent road system. The win brought in many orders, and Gunn focused his attention on the Russian market, establishing dealerships in St Petersburg and Moscow in 1910.

In truth, Russian roads presented entrants with daunting driving conditions and the route, which included St Petersburg, Riga, Kiev and Moscow, was a rigorous test for any car. Gunn's success was a vindication of the Lagonda's sturdy build and swift performance. It was not until the following year that Lagonda began marketing cars in its home country, beginning a limited production of light cars that was eventually halted by the First World War.

Throughout the 20s and 30s, the company expanded its premises in Staines, England with the light cars giving way to more substantial touring models. Lagonda came to epitomise the Edwardian passion for setting new records and exploring new territories, with robust and reliable vehicles that could effortlessly forge trans-continental links.

In 1933, the manufacturer launched the M45 at the Olympia Motor Show in London, a sporting tourer powered by the Henry Meadows-designed six-cylinder 4.5-litre engine. The prototype was driven by the aristocrat and enthusiast Edward Russell, Lord de Clifford, from Dieppe to Brindisi in Greece, beating the express train along the same route by some 14 hours. The result was a media sensation.

The M45 quickly became known as a car for the discerning sportsman, fast and capable yet also sufficiently comfortable for long journeys. In its day it had the largest engine in its class, a distinction that attracted owners like the land speed record holder Sir Malcolm Campbell, who had his M45 painted in his signature blue.

The emerging sport of long-distance endurance racing also became an integral part of Lagonda's development. In June 1935, a lightweight version of the M45 won the Le Mans 24 hours, with John Hindmarsh and Luis Fontes behind the wheel. This was a landmark achievement for the brand, as well as a highpoint of British sports car racing
in the interwar era following Bentley's heyday in the 1920s.

The same month, Lagonda was bought by Alan Good, a charismatic British lawyer whose first task was to enlist the skills of engineer W.O. Bentley. The results were the LG45 styled by Frank Feeley that represented the apex of the engineering skills of the time. In 1936, W.O. Bentley designed Lagonda's first V12, an engine that was perfectly at home in the majestic long-wheelbase version of the new chassis.

The Lagondas of the 1930s demonstrated total harmony between engineering and appearance, including the stately LG6 model introduced in 1937. W.O. Bentley's diligent innovation and refinement continued throughout the war, and the company developed the LG6 into a V12 model, an even more 'imposing and dignified' saloon that sadly ceased production before the start of the war. Simultaneously, the engineer developed a new six-cylinder engine, during the war, the benefits of which were soon to be reaped by Aston Martin.

Aston Martin's association with Lagonda began in 1947, when David Brown, the marque's new owner, purchased the company for £52,500. The collaboration gave Aston Martin access to W.O.Bentley's new 2.6L DOHC six cylinder engine, as well as the talents of the company's long-serving bodywork stylist Frank Feeley.

Feeley was responsible for the elegant drophead variant of the new 2.6 litre, the first Lagonda of the David Brown era, produced from 1948 to 1953. At the end of 1952 the 2.6 litre was developed into the 3.0 litre, which used a revised version of the W.O. Bentley engine. The two-door saloon was soon joined by a four-door and a drophead coupe. The next Lagonda was the Touring-designed Rapide of 1963, a sleek four-door saloon that shared many components with the Aston Martin DB4. Fifty-five were built, of which 48 survive. In the late 1960s, Aston Martin's head designer, William Towns, developed a new four-door saloon from the Aston Martin DBS. Just seven examples were built in the mid 1970s.

In 1976, Aston Martin announced a Lagonda for a new era, a unique, innovative car designed by William Towns in the contemporary 'wedge' fashion he made his own. Standing aesthetically and technologically distinct from the Aston Martin range, the Lagonda was bold and experimental, a high performance luxury saloon for the truly discerning.

The Lagonda name was briefly revived for the Vignale Concept, an imposing luxury saloon created by Ghia Design in 1993. One example survives. The name was also used for the strictly limited production of the Lagonda Virage Saloon and Shooting Brake in 1994.

Lagonda's history is long and eventful, encompassing two of the most significant figures in twentieth century British engineering, W.O.Bentley and David Brown, racing glory and some of the most dramatic designs in automotive history.

In the 21st century, Lagonda will return, bringing a sense of adventure and the avant-garde to the luxury car market, honouring a remarkable history while also making a bold statement for the future.

source : Aston Martin Press

Aston Martin Lagonda


Post by: Automotive

Aston Martin Lagonda


Post by: Automotive

Friday, February 12, 2010

Peugeot SR1


Post by: Automotive
- 200th anniversary of the Marque
- New styling direction, new mobility offers and a new visual identity
- First car to display the new Lion badge – The stunning new RCZ
- Environmental offensive: iOn, 100% electric

It was in 1810 that Jean-Pierre and Jean-Frédéric Peugeot turned their father’s cereal mill into a steel foundry and took the Peugeot family into the industrial era.

Now 200 years later, a new chapter in the Peugeot story is about to open with a further evolution of the brand; a new styling direction, a new corporate Lion badge and a new signature – Peugeot MOTION & EMOTION.

The look of individual products is the visual face of the brand in the eyes of its current and prospective customers. To enable Peugeot to evolve and adapt to future challenges, Peugeot’s current styling direction will change into a new look, typified by the new Peugeot SR1 concept car. This dream car embodies a new stronger, more extreme and pure expression of the Peugeot Style of tomorrow and also displays a new look corporate Lion badge.

The SR1 concept car also blends styles in terms of its technical characteristics. For example, it incorporates HYbrid4 technology, which will be available in the Peugeot 3008 from 2011. On the SR1, at the front, a 1.6 litre THP petrol engine with a power output of 218 bhp is combined with a rear electric motor developing 95 bhp. In electric only mode, the car becomes a Zero Emission Vehicle (ZEV), with a combined cycle fuel consumption of 57.7 mpg or 119 g/km of CO2.

When the two power trains operate simultaneously, the SR1 develops a potential maximum power output of 313 bhp, while benefiting also from four-wheel drive.

With the use of HYbrid4 technology, which will eventually be available on different models in the Peugeot range, the SR1 concept offers convincing proof that driving enjoyment can be combined with environmental friendliness.

The vehicle’s dynamic efficiency is enhanced by a rigid, lightweight structure comprising of a one-piece body incorporating a tubular chassis onto which are mounted the mechanical components and suspension.

Exploiting the best of existing technology to offer road holding worthy of this exceptional concept, the suspension consists of double wishbones with drop links at the front and the rear. For even greater driving precision, the SR1 innovates also through the adoption of four-wheel steering. Motorised links on the rear suspension wishbones control the turning angle of the rear wheels as a function of vehicle speed, giving the vehicle superb agility under all circumstances.

The Peugeot SR1 concept car will be unveiled to the general public at the 2010 Geneva Motor Show, in March.

The Lion symbol, which has been associated with Peugeot products since 1858, is evolving too. Created by Peugeot’s own designers, the Lion badge is a focal point on every vehicle. The new Lion is now simpler in design, more dynamic, with a new posture and fluidity. It has a new bi-metallic look through the use of both matt and polished finishes.

Three-dimensional in design for greater modernity it discards the current blue flag background for a stronger effect. The current Peugeot blue colour also becomes darker and is now combined into the new font used to create the Marque’s name.

The first production vehicle to display this new Lion will be the stunning Peugeot RCZ launched in the Spring.

To reduce its ecological footprint and dependency on fossil fuels, Peugeot has been actively investing in a range of new technologies to meet the needs of future mobility, without sacrificing driving enjoyment.

Today, Peugeot continues to improve engine efficiency through its downsizing strategy for both petrol and HDi FAP diesel engines. Alongside this; the Marque is also currently developing a new three cylinder petrol engine.

Tomorrow, the range of cars will consist of:

100% electric – The first product called the i0n, which will initially be launched onto the European market at the end of 2010, is compact and very easy to drive, and can easily accommodate four people in its spacious interior. Offering good levels of driveability in all circumstances, it is designed for the urban and suburban traffic of Europe’s large cities.

Powered by Li-ion batteries that give it a top speed of 80 mph and a range of 80 miles when fully charged, they can be recharged fully in six hours via a standard household electrical socket or to 80% of their capacity in just 30 minutes, via a bespoke rapid recharging unit.

In terms of light commercial vehicles (LCVs), from the spring of 2010, a 100% electric Partner Origin van will also be available, with a load capacity of 3 m3.

Micro-Hybrid – Peugeot’s e-HDi system will be widely introduced across the Marque’s model range from the end of 2011. It will reduce both fuel consumption and CO2 emissions by up to 15%.

Full-Hybrid – In the spring of 2011, the 3008 HYbrid4 will combine environmental efficiency and versatility in day-to-day use.

This innovative technology allows:

a reduction in fuel consumption and CO2 emissions of 35% (74.3 mpg, 99g of CO2)
a “zero emission” mode when the vehicle is driven in electric only mode, benefiting fuel economy and silent operation
a boost to performance, with a potential maximum power output of 200 bhp
As the electric power train is mounted at the rear of the vehicle it also provides a number of other benefits such as the ability to provide all wheel drive.

The Peugeot 3008 Hybrid4 will be the first diesel hybrid on the market and will be followed by other Peugeot hybrid models.

HYbrid4 Plug-in - In 2012, Peugeot will be introducing plug-in HYbrid4 technology for a further reduction in emissions levels: the target is less than 50g of CO2/km and 141 mpg.

This environmental strategy followed by the Marque also applies to its two-wheeled vehicles produced by Peugeot Scooters.

Peugeot is currently developing an electric bicycle in partnership with Ultra Motor. It is powered by an electric motor combined with a removable 36 volt Li-ion battery pack, offering a range of 44 miles.

The E-Vivacity, a 100% electric scooter with a power equivalent to that of a 50 cm3 petrol engined scooter, is a new eco-friendly mode of transport, which is reasonably priced and offers extremely low maintenance and running costs.

Its Li-ion battery pack can be fully recharged in 4 hours and recharged to 80% of its capacity in 2 hours, offering a range from 50 to 62 miles.

Clean and quiet, with good acceleration from a standing start and a maximum speed of 28 mph, it blends seamlessly into urban traffic. The production model will be unveiled at the end of 2010 and will go on sale in 2011. With 15 years experience in this type of technology, Peugeot is perfectly placed to maximise every opportunity.

On the strength of the technology already deployed in its cars and two-wheelers, Peugeot is rising to the environmental challenge of today and tomorrow. Peugeot is, however, going further with a comprehensive response to the mobility needs of the future.

Capitalising on its comprehensive range of cars, light commercial vehicles, scooters and cycles, Peugeot has created an original mobility service offer called, Mu by Peugeot.

This unique and innovative service allows everyone, whether or not they own a vehicle, and whether or not they are already a Peugeot customer, to access a range of mobility services, all by means of a pre-paid credit card which can be topped up online. The principle is simple: customers top up their cards by purchasing mobility units directly on the website. These mobility units can then be used in two different ways:

To rent products and accessories from the Peugeot range, such as a private vehicle (207, 308 CC, 3008…) for a weekend away, a bicycle for a family outing, a scooter for getting around town, a commercial vehicle for moving house or an accessory for a special journey: GPS, roof rack, etc…
To purchase services from one of the programmes partners. The card holder can book a plane or train ticket, a hotel room, or organise a personalised journey. Driving lessons, an introduction to eco-friendly driving or advanced driving lessons can also be booked.

The programme has already been trialled successfully in a number of cities in France and among 20,000 group employees. In December 2009, 27 Parisian sites were introduced to the current programme, including Peugeot dealers, Peugeot Scooter dealers, and Peugeot Avenue, the Marque’s ‘shop window’ on the Champs Elysées. Roll-out in a number of other European cities is planned in the near future: Berlin, Rome, London, Brussels and Madrid…

So far, 42% of Mu by Peugeot users make use of this service to experience Peugeot’s range of private vehicles and with Mu by Peugeot, the Marque is forging new relationships with its customers. It is also a service that generates additional point of sale traffic by attracting new customers, and is, therefore, also a means of winning market share for the Marque.

Since 1810, Peugeot has associated its name, and later its Lion emblem, to hand-saws, tools, steel crinoline stays, coffee grinders, salt and pepper grinders, bicycles, motorcycles, scooters, cars and light commercial vehicles. To each of these worlds Peugeot has brought passion and innovation, while laying emphasis on its industrial origins based in particular on strong principles and the working of steel.

Now a new and exciting chapter is about to start!

source : Peugeot Press

Peugeot SR1


Post by: Automotive
- 200th anniversary of the Marque
- New styling direction, new mobility offers and a new visual identity
- First car to display the new Lion badge – The stunning new RCZ
- Environmental offensive: iOn, 100% electric

It was in 1810 that Jean-Pierre and Jean-Frédéric Peugeot turned their father’s cereal mill into a steel foundry and took the Peugeot family into the industrial era.

Now 200 years later, a new chapter in the Peugeot story is about to open with a further evolution of the brand; a new styling direction, a new corporate Lion badge and a new signature – Peugeot MOTION & EMOTION.

The look of individual products is the visual face of the brand in the eyes of its current and prospective customers. To enable Peugeot to evolve and adapt to future challenges, Peugeot’s current styling direction will change into a new look, typified by the new Peugeot SR1 concept car. This dream car embodies a new stronger, more extreme and pure expression of the Peugeot Style of tomorrow and also displays a new look corporate Lion badge.

The SR1 concept car also blends styles in terms of its technical characteristics. For example, it incorporates HYbrid4 technology, which will be available in the Peugeot 3008 from 2011. On the SR1, at the front, a 1.6 litre THP petrol engine with a power output of 218 bhp is combined with a rear electric motor developing 95 bhp. In electric only mode, the car becomes a Zero Emission Vehicle (ZEV), with a combined cycle fuel consumption of 57.7 mpg or 119 g/km of CO2.

When the two power trains operate simultaneously, the SR1 develops a potential maximum power output of 313 bhp, while benefiting also from four-wheel drive.

With the use of HYbrid4 technology, which will eventually be available on different models in the Peugeot range, the SR1 concept offers convincing proof that driving enjoyment can be combined with environmental friendliness.

The vehicle’s dynamic efficiency is enhanced by a rigid, lightweight structure comprising of a one-piece body incorporating a tubular chassis onto which are mounted the mechanical components and suspension.

Exploiting the best of existing technology to offer road holding worthy of this exceptional concept, the suspension consists of double wishbones with drop links at the front and the rear. For even greater driving precision, the SR1 innovates also through the adoption of four-wheel steering. Motorised links on the rear suspension wishbones control the turning angle of the rear wheels as a function of vehicle speed, giving the vehicle superb agility under all circumstances.

The Peugeot SR1 concept car will be unveiled to the general public at the 2010 Geneva Motor Show, in March.

The Lion symbol, which has been associated with Peugeot products since 1858, is evolving too. Created by Peugeot’s own designers, the Lion badge is a focal point on every vehicle. The new Lion is now simpler in design, more dynamic, with a new posture and fluidity. It has a new bi-metallic look through the use of both matt and polished finishes.

Three-dimensional in design for greater modernity it discards the current blue flag background for a stronger effect. The current Peugeot blue colour also becomes darker and is now combined into the new font used to create the Marque’s name.

The first production vehicle to display this new Lion will be the stunning Peugeot RCZ launched in the Spring.

To reduce its ecological footprint and dependency on fossil fuels, Peugeot has been actively investing in a range of new technologies to meet the needs of future mobility, without sacrificing driving enjoyment.

Today, Peugeot continues to improve engine efficiency through its downsizing strategy for both petrol and HDi FAP diesel engines. Alongside this; the Marque is also currently developing a new three cylinder petrol engine.

Tomorrow, the range of cars will consist of:

100% electric – The first product called the i0n, which will initially be launched onto the European market at the end of 2010, is compact and very easy to drive, and can easily accommodate four people in its spacious interior. Offering good levels of driveability in all circumstances, it is designed for the urban and suburban traffic of Europe’s large cities.

Powered by Li-ion batteries that give it a top speed of 80 mph and a range of 80 miles when fully charged, they can be recharged fully in six hours via a standard household electrical socket or to 80% of their capacity in just 30 minutes, via a bespoke rapid recharging unit.

In terms of light commercial vehicles (LCVs), from the spring of 2010, a 100% electric Partner Origin van will also be available, with a load capacity of 3 m3.

Micro-Hybrid – Peugeot’s e-HDi system will be widely introduced across the Marque’s model range from the end of 2011. It will reduce both fuel consumption and CO2 emissions by up to 15%.

Full-Hybrid – In the spring of 2011, the 3008 HYbrid4 will combine environmental efficiency and versatility in day-to-day use.

This innovative technology allows:

a reduction in fuel consumption and CO2 emissions of 35% (74.3 mpg, 99g of CO2)
a “zero emission” mode when the vehicle is driven in electric only mode, benefiting fuel economy and silent operation
a boost to performance, with a potential maximum power output of 200 bhp
As the electric power train is mounted at the rear of the vehicle it also provides a number of other benefits such as the ability to provide all wheel drive.

The Peugeot 3008 Hybrid4 will be the first diesel hybrid on the market and will be followed by other Peugeot hybrid models.

HYbrid4 Plug-in - In 2012, Peugeot will be introducing plug-in HYbrid4 technology for a further reduction in emissions levels: the target is less than 50g of CO2/km and 141 mpg.

This environmental strategy followed by the Marque also applies to its two-wheeled vehicles produced by Peugeot Scooters.

Peugeot is currently developing an electric bicycle in partnership with Ultra Motor. It is powered by an electric motor combined with a removable 36 volt Li-ion battery pack, offering a range of 44 miles.

The E-Vivacity, a 100% electric scooter with a power equivalent to that of a 50 cm3 petrol engined scooter, is a new eco-friendly mode of transport, which is reasonably priced and offers extremely low maintenance and running costs.

Its Li-ion battery pack can be fully recharged in 4 hours and recharged to 80% of its capacity in 2 hours, offering a range from 50 to 62 miles.

Clean and quiet, with good acceleration from a standing start and a maximum speed of 28 mph, it blends seamlessly into urban traffic. The production model will be unveiled at the end of 2010 and will go on sale in 2011. With 15 years experience in this type of technology, Peugeot is perfectly placed to maximise every opportunity.

On the strength of the technology already deployed in its cars and two-wheelers, Peugeot is rising to the environmental challenge of today and tomorrow. Peugeot is, however, going further with a comprehensive response to the mobility needs of the future.

Capitalising on its comprehensive range of cars, light commercial vehicles, scooters and cycles, Peugeot has created an original mobility service offer called, Mu by Peugeot.

This unique and innovative service allows everyone, whether or not they own a vehicle, and whether or not they are already a Peugeot customer, to access a range of mobility services, all by means of a pre-paid credit card which can be topped up online. The principle is simple: customers top up their cards by purchasing mobility units directly on the website. These mobility units can then be used in two different ways:

To rent products and accessories from the Peugeot range, such as a private vehicle (207, 308 CC, 3008…) for a weekend away, a bicycle for a family outing, a scooter for getting around town, a commercial vehicle for moving house or an accessory for a special journey: GPS, roof rack, etc…
To purchase services from one of the programmes partners. The card holder can book a plane or train ticket, a hotel room, or organise a personalised journey. Driving lessons, an introduction to eco-friendly driving or advanced driving lessons can also be booked.

The programme has already been trialled successfully in a number of cities in France and among 20,000 group employees. In December 2009, 27 Parisian sites were introduced to the current programme, including Peugeot dealers, Peugeot Scooter dealers, and Peugeot Avenue, the Marque’s ‘shop window’ on the Champs Elysées. Roll-out in a number of other European cities is planned in the near future: Berlin, Rome, London, Brussels and Madrid…

So far, 42% of Mu by Peugeot users make use of this service to experience Peugeot’s range of private vehicles and with Mu by Peugeot, the Marque is forging new relationships with its customers. It is also a service that generates additional point of sale traffic by attracting new customers, and is, therefore, also a means of winning market share for the Marque.

Since 1810, Peugeot has associated its name, and later its Lion emblem, to hand-saws, tools, steel crinoline stays, coffee grinders, salt and pepper grinders, bicycles, motorcycles, scooters, cars and light commercial vehicles. To each of these worlds Peugeot has brought passion and innovation, while laying emphasis on its industrial origins based in particular on strong principles and the working of steel.

Now a new and exciting chapter is about to start!

source : Peugeot Press

Peugeot SR1




Post by: Automotive


- 200th anniversary of the Marque
- New styling direction, new mobility offers and a new visual identity
- First car to display the new Lion badge – The stunning new RCZ
- Environmental offensive: iOn, 100% electric

It was in 1810 that Jean-Pierre and Jean-Frédéric Peugeot turned their father’s cereal mill into a steel foundry and took the Peugeot family into the industrial era.

Now 200 years later, a new chapter in the Peugeot story is about to open with a further evolution of the brand; a new styling direction, a new corporate Lion badge and a new signature – Peugeot MOTION & EMOTION.



The look of individual products is the visual face of the brand in the eyes of its current and prospective customers. To enable Peugeot to evolve and adapt to future challenges, Peugeot’s current styling direction will change into a new look, typified by the new Peugeot SR1 concept car. This dream car embodies a new stronger, more extreme and pure expression of the Peugeot Style of tomorrow and also displays a new look corporate Lion badge.

The SR1 concept car also blends styles in terms of its technical characteristics. For example, it incorporates HYbrid4 technology, which will be available in the Peugeot 3008 from 2011. On the SR1, at the front, a 1.6 litre THP petrol engine with a power output of 218 bhp is combined with a rear electric motor developing 95 bhp. In electric only mode, the car becomes a Zero Emission Vehicle (ZEV), with a combined cycle fuel consumption of 57.7 mpg or 119 g/km of CO2.

When the two power trains operate simultaneously, the SR1 develops a potential maximum power output of 313 bhp, while benefiting also from four-wheel drive.

With the use of HYbrid4 technology, which will eventually be available on different models in the Peugeot range, the SR1 concept offers convincing proof that driving enjoyment can be combined with environmental friendliness.

The vehicle’s dynamic efficiency is enhanced by a rigid, lightweight structure comprising of a one-piece body incorporating a tubular chassis onto which are mounted the mechanical components and suspension.

Exploiting the best of existing technology to offer road holding worthy of this exceptional concept, the suspension consists of double wishbones with drop links at the front and the rear. For even greater driving precision, the SR1 innovates also through the adoption of four-wheel steering. Motorised links on the rear suspension wishbones control the turning angle of the rear wheels as a function of vehicle speed, giving the vehicle superb agility under all circumstances.

The Peugeot SR1 concept car will be unveiled to the general public at the 2010 Geneva Motor Show, in March.

The Lion symbol, which has been associated with Peugeot products since 1858, is evolving too. Created by Peugeot’s own designers, the Lion badge is a focal point on every vehicle. The new Lion is now simpler in design, more dynamic, with a new posture and fluidity. It has a new bi-metallic look through the use of both matt and polished finishes.

Three-dimensional in design for greater modernity it discards the current blue flag background for a stronger effect. The current Peugeot blue colour also becomes darker and is now combined into the new font used to create the Marque’s name.

The first production vehicle to display this new Lion will be the stunning Peugeot RCZ launched in the Spring.

To reduce its ecological footprint and dependency on fossil fuels, Peugeot has been actively investing in a range of new technologies to meet the needs of future mobility, without sacrificing driving enjoyment.

Today, Peugeot continues to improve engine efficiency through its downsizing strategy for both petrol and HDi FAP diesel engines. Alongside this; the Marque is also currently developing a new three cylinder petrol engine.

Tomorrow, the range of cars will consist of:

100% electric – The first product called the i0n, which will initially be launched onto the European market at the end of 2010, is compact and very easy to drive, and can easily accommodate four people in its spacious interior. Offering good levels of driveability in all circumstances, it is designed for the urban and suburban traffic of Europe’s large cities.

Powered by Li-ion batteries that give it a top speed of 80 mph and a range of 80 miles when fully charged, they can be recharged fully in six hours via a standard household electrical socket or to 80% of their capacity in just 30 minutes, via a bespoke rapid recharging unit.

In terms of light commercial vehicles (LCVs), from the spring of 2010, a 100% electric Partner Origin van will also be available, with a load capacity of 3 m3.

Micro-Hybrid – Peugeot’s e-HDi system will be widely introduced across the Marque’s model range from the end of 2011. It will reduce both fuel consumption and CO2 emissions by up to 15%.

Full-Hybrid – In the spring of 2011, the 3008 HYbrid4 will combine environmental efficiency and versatility in day-to-day use.

This innovative technology allows:

a reduction in fuel consumption and CO2 emissions of 35% (74.3 mpg, 99g of CO2)
a “zero emission” mode when the vehicle is driven in electric only mode, benefiting fuel economy and silent operation
a boost to performance, with a potential maximum power output of 200 bhp
As the electric power train is mounted at the rear of the vehicle it also provides a number of other benefits such as the ability to provide all wheel drive.

The Peugeot 3008 Hybrid4 will be the first diesel hybrid on the market and will be followed by other Peugeot hybrid models.

HYbrid4 Plug-in - In 2012, Peugeot will be introducing plug-in HYbrid4 technology for a further reduction in emissions levels: the target is less than 50g of CO2/km and 141 mpg.

This environmental strategy followed by the Marque also applies to its two-wheeled vehicles produced by Peugeot Scooters.

Peugeot is currently developing an electric bicycle in partnership with Ultra Motor. It is powered by an electric motor combined with a removable 36 volt Li-ion battery pack, offering a range of 44 miles.

The E-Vivacity, a 100% electric scooter with a power equivalent to that of a 50 cm3 petrol engined scooter, is a new eco-friendly mode of transport, which is reasonably priced and offers extremely low maintenance and running costs.

Its Li-ion battery pack can be fully recharged in 4 hours and recharged to 80% of its capacity in 2 hours, offering a range from 50 to 62 miles.

Clean and quiet, with good acceleration from a standing start and a maximum speed of 28 mph, it blends seamlessly into urban traffic. The production model will be unveiled at the end of 2010 and will go on sale in 2011. With 15 years experience in this type of technology, Peugeot is perfectly placed to maximise every opportunity.

On the strength of the technology already deployed in its cars and two-wheelers, Peugeot is rising to the environmental challenge of today and tomorrow. Peugeot is, however, going further with a comprehensive response to the mobility needs of the future.

Capitalising on its comprehensive range of cars, light commercial vehicles, scooters and cycles, Peugeot has created an original mobility service offer called, Mu by Peugeot.

This unique and innovative service allows everyone, whether or not they own a vehicle, and whether or not they are already a Peugeot customer, to access a range of mobility services, all by means of a pre-paid credit card which can be topped up online. The principle is simple: customers top up their cards by purchasing mobility units directly on the website. These mobility units can then be used in two different ways:

To rent products and accessories from the Peugeot range, such as a private vehicle (207, 308 CC, 3008…) for a weekend away, a bicycle for a family outing, a scooter for getting around town, a commercial vehicle for moving house or an accessory for a special journey: GPS, roof rack, etc…
To purchase services from one of the programmes partners. The card holder can book a plane or train ticket, a hotel room, or organise a personalised journey. Driving lessons, an introduction to eco-friendly driving or advanced driving lessons can also be booked.

The programme has already been trialled successfully in a number of cities in France and among 20,000 group employees. In December 2009, 27 Parisian sites were introduced to the current programme, including Peugeot dealers, Peugeot Scooter dealers, and Peugeot Avenue, the Marque’s ‘shop window’ on the Champs Elysées. Roll-out in a number of other European cities is planned in the near future: Berlin, Rome, London, Brussels and Madrid…

So far, 42% of Mu by Peugeot users make use of this service to experience Peugeot’s range of private vehicles and with Mu by Peugeot, the Marque is forging new relationships with its customers. It is also a service that generates additional point of sale traffic by attracting new customers, and is, therefore, also a means of winning market share for the Marque.

Since 1810, Peugeot has associated its name, and later its Lion emblem, to hand-saws, tools, steel crinoline stays, coffee grinders, salt and pepper grinders, bicycles, motorcycles, scooters, cars and light commercial vehicles. To each of these worlds Peugeot has brought passion and innovation, while laying emphasis on its industrial origins based in particular on strong principles and the working of steel.

Now a new and exciting chapter is about to start!

source : Peugeot Press

Chevrolet Camaro



Post by: Automotive

Chevrolet Silverado



Post by: Automotive

Chevrolet Camaro Synergy


Post by: Automotive

Tuesday, February 9, 2010

Monday, February 8, 2010

Lamborghini Reventon Picture


Lamborghini Reventon
Lamborghini Reventon
Lamborghini Reventon Wallpaper

Lamborghini Reventon Wallpaper
Lamborghini Reventon Wallpapers

Lamborghini Reventon Wallpapers
Lamborghini Reventon Picture
Lamborghini Reventon Picture

Kia Cee'd


Post by: Automotive

Kia Soul


Post by: Automotive

Kia Soul'ster


Post by: Automotive

Opel Meriva 2010






Post by: Automotive

Innovative, versatile and elegant: The second generation Opel Meriva, to premiere at the 2010 Geneva Motor Show, will set the new standard for automotive versatility with a multitude of innovative features engineered to optimize the flexible use of space. And it is all packed in a distinctive, contemporary design.

After pioneering automobile on-board versatility with the compact seven-seater Zafira in 1999, Opel created a new market segment for small, affordable monocabs when it launched the first generation Opel Meriva in 2003. With its revolutionary FlexSpace rear-seating concept, high seating position and roomy cabin, the Opel Meriva was big on flexibility yet small in size. This popular formula has enabled it to consistently lead the small monocab segment, with sales in Europe totaling more than 1 million units.



Now, the second generation Opel Meriva again raises the bar for affordable, on-board flexibility. Its FlexSpace system has been further developed to become even more intuitive and easier to use. It also introduces FlexDoors, innovative rear-hinged rear doors that facilitate access to its cabin - a premiere for a volume manufacturer. Moreover, the new Meriva features great interior storage space enhanced by a revolutionary concept of flexible center console, as well as the Opel-exclusive FlexFix system - the integrated rear bicycle carrier that is stored like a drawer under the luggage compartment.

The Opel Meriva's flexibility trademark is enhanced by expressive exterior and interior styling that carries forward Opel's award-winning new sculptural design language. Its monocab silhouette is fluid, elegant and dynamic. The rear window graphic features a distinctive wave accentuating the rear-hinged FlexDoors, improving the view for rear seated passengers, particularly children.

The new reference in on-board versatility

"With the Opel Zafira Flex 7 and the Meriva's FlexSpace seating concepts, we invented a new kind of fully integrated, on-board flexibility," says Alain Visser, Vice President Sales, Marketing and Aftersales Opel/Vauxhall. "With the new Meriva, we wanted to engineer the new versatility champion in the automotive industry. I don't see any other car offering so many ideas that make one's life easier."

Increased flexibility is extended to all areas in the new Opel Meriva. In the cabin, the innovative FlexSpace rear seating system introduced in the first Opel Meriva has been further developed: It requires even less effort to move the seats in their different positions or to fold them down.

Throughout the cabin, storage space is considerably increased with convenient locations provided for items commonly carried inside a car. The revolutionary FlexRail console system consisting of exchangeable storage units that can slide on rails located between the front seats provides convenient and adaptable storage for any kind of use.

Up front, the generously proportioned seats are similar to those of the new Opel Astra and Insignia. They offer a class-leading range of adjustment - 240 mm forwards/backwards and 65 mm in height - allowing people of all size and age to find optimal comfort for their journeys. Also new for Opel Meriva is the availability of Opel's unique FlexFix integrated rear bicycle carrier.

Entering into a new era of doors

Opel Meriva opens up a new dimension in rear seat access with unique rear-hinged rear doors. The FlexDoors concept is a first from a volume manufacturer in the industry. Unlike the few well-known rear-hinged doors systems available, FlexDoors features full-sized doors which open independently without the need for a clamshell overlap by the front doors. A conventional B-pillar makes this independent opening possible, while ensuring good body rigidity and side impact protection. In addition, it has a handle that further facilitates entry and exit.

FlexDoors provide great functionality by making it easy to get into and out of the rear seat. Locating the door hinges on the C-pillar also allows more clearance for passengers' feet to swing past the B-pillar flange. The FlexDoors also open up to 84 degrees, much wider than conventional doors, for which 68-70 degrees is the usual standard. Front passengers also benefit from the same 84 degrees opening angle. FlexDoors are also more ergonomic and convenient for the front passengers to open FlexDoors when stowing a jacket, a briefcase or an umbrella behind the front seat.

FlexDoors also provide greater safety, especially for young families. Parents can reach into the rear seat more easily to help with buckling up, and children can be more safely guided when getting in and out of the vehicle. For example, when both the front and rear doors are open at the same time, a safety zone is created as both child and parent can get out of the car without a door separating them, reducing the risk of children stepping out into traffic.

FlexDoors add style to increased functionality. Stepping in and out of the vehicle not only feels much more natural, it looks cool and elegant. It's no longer necessary to twist or slide out of the rear seat.

The FlexDoors concept has been successfully market tested and evaluated with Opel Meriva customers since 2006. It s supported by an array of patented locking systems designed to optimize safety.

Monocab expression of new Opel design

Inside and out, the Opel Meriva moves forward Opel's new, expressive design language - sculptural artistry meets German precision - and adheres to the same focus on quality already seen on Insignia and the new Astra.

Opel designers created a dynamic and elegant monocab. A lower, sweeping roof-line combined with Opel's signature blade side-body motif and the wave rear window line give the Opel Meriva a fresh, distinctive character and look.

The FlexDoors invite you to an interior landscape of harmoniously flowing lines and surfaces. The wraparound wing shaped instrument panel enhances the feeling of width and roominess. The forward leaning center stack contributes to this and adds a notion of sportiness and sculpture.

The interior is appointed with six different levels of colour and trim. The widest choice ever offered on an Opel. The high standard of fit and finish of the chosen textures and materials as well as the layout and decoration of the controls is typical of more expensive cars.

Opel Meriva to launch with six environmentally friendly engines

The new Meriva benefits from a longer wheelbase, wider front and rear tracks, all contributing to improved handling and greater ride comfort.

The range of powertrains features economical and efficient turbocharged engines offering a power bandwidth from 75 to 140 hp. A particularly economical ecoFLEX version will also be offered. The Opel Meriva will offer a choice of 5 and 6-speed manual transmissions as well as a 6-speed automatic gearbox.

Designed and developed at Opel's engineering center in Rüsselsheim, Germany, the new Opel Meriva will be built in Zaragoza, Spain and is scheduled to go on sale in the summer of 2010.

source : Opel Press

Opel Meriva 2010


Post by: Automotive

Opel Meriva 2010


Post by: Automotive

Sunday, February 7, 2010

CADILLAC PREMIERES 2011 CTS-V COUPE





Post by: Automotive

-- New CTS Coupe design combines with V-Series performance
-- 556-hp (415-kW) supercharged 6.2L V-8
-- Six-speed manual or six-speed automatic with paddle shift control
-- Magnetic Ride Control and Brembo brakes
-- New Saffron interior trim accent color
-- On sale in early summer

DETROIT – Cadillac today announced the 2011 CTS-V Coupe, which debuts at the 2010 North American International Auto Show in Detroit. It combines the new CTS Coupe’s dramatic design with the 556-horsepower (415-kW) supercharged V-8 engine from the CTS-V sedan. The result is a luxury sports coupe aimed at driving enthusiasts.


“The CTS-V Coupe marries our most potent and sophisticated technology with our most dramatic production design,” said Bryan Nesbitt, Cadillac general manager. “This combination of visual and technical attributes is designed to create a very compelling choice for luxury sports car consumers.”


The CTS-V Coupe begins production this summer. Its suite of technical and performance elements includes Magnetic Ride Control, racing-bred Brembo brakes and an available automatic transmission with paddle-shift control.

The V-Series Coupe includes a unique grille that doubles the car’s air intake volume, an important enabler for its high-performance capabilities. It is also visually identified by a raised center section of the hood that provides clearance for the supercharger, as well as specific front and rear fascias. Like the CTS Coupe, its exhaust is centered inside the rear fascia, but with unique twin outlets. The car rolls on 19-inch cast aluminum wheels, available in either painted or polished finishes, and Michelin Pilot Sport 2 performance tires.

The CTS-V Coupe’s rear track is nearly an inch wider than the CTS-V Sport Sedan, adding to the car’s aggressive stance and enabling an extra measure of handling capability. The current CTS-V Sport Sedan has quickly established itself among the world’s highest performing luxury sedans, becoming the first production four-door on street tires to break the legendary 8-minute barrier at Germany’s famed Nürburgring. The new V-Series Coupe’s sleeker shape and slightly lower mass ensure a similarly high level of performance.

Inside, the 2+2 cabin combines performance and luxury. A new Saffron interior trim color is offered, with contrasting microfiber seat inserts and stitching on the upper trim areas.

Form follows function

The CTS-V Coupe’s design is a clear visual statement of the technical precision and performance intent of the car.

The Coupe has the same wheelbase as the CTS-V Sport Sedan, but its overall height is about two inches (51 mm) lower and its overall length is two inches (51 mm) shorter. The two models share only the instrument panel, console, headlamps, front fenders and grille.

Key design features include:

--Classic hardtop styling, with no conventional B-pillar
-- Touch-pad operation for the doors removes the need for conventional door handles
-- Faster windshield angle (62.3 degrees) and a nearly horizontal backglass enable an aerodynamic profile
-- Signature vertical lighting, highlighted with LED light pipes
-- Signature center high-mounted stop lamp functions as a rear spoiler
-- Aerodynamic roof-mounted antenna for OnStar and XM Satellite Radio

Supercharged powertrain

The CTS-V Coupe employs the LSA 6.2L supercharged V-8 engine also found on the CTS-V Sport Sedan. Rated at 556 horsepower (415 kW) and 551 lb.-ft. of torque (747 Nm), it is the most powerful engine offered in Cadillac’s history and propels the CTS-V Coupe from 0-60 mph in 3.9 seconds.

The LSA engine features an intercooled Eaton supercharger system, premium aluminum-alloy cylinder heads and numerous details designed to ensure it makes its power as quietly and smoothly as possible. The supercharger, for example, has a unique, four-lobe rotor design that enhances quietness while also optimizing the performance parameters of the engine.

A pair of six-speed transmissions is offered in the CTS-V Coupe: a Tremec TR6060 six-speed manual with a dual-disc clutch and a Hydra-Matic 6L90 six-speed automatic with paddle-shift control. Performance Algorithm Shifting is part of the 6L90’s programming and provides a performance-oriented shift pattern during sustained high-performance driving. As with many Cadillac models, the driver needs only to slide the shifter into the manual “gate” to put the transmission into that more aggressive mode.

The paddle shift control requires no shift lever movement. Steering wheel thumb controls allow immediate and quick tap up/tap down gear selection.

Magnetic Ride Control

The V-Series reaches elite levels of road-holding performance, but also maintains the poise of a luxury car in “regular” driving conditions. The technical enabler of that dual-mode driving character is Cadillac’s landmark Magnetic Ride Control. It is standard on the CTS-V Coupe and is the world’s fastest-reacting suspension technology. It uses shocks controlled by advanced magneto-rheological technology, rather than mechanical valves, to greatly accelerate response time and precision.

Electronic sensors at all four wheels literally “read the road” every millisecond, making constant adjustments to damping to create virtually instantaneous and extremely precise control of body motions. This is of particular benefit for a high-performance car because it helps keep the car very composed during hard cornering, acceleration, braking and other dynamic maneuvers.

The Magnetic Ride shocks also enable a broader range of damping control to optimize the ride and handling for all driving conditions. In the CTS-V Coupe, an extra measure of control is offered, with two selectable modes (Tour and Sport), enabling the driver to tailor the suspension for grand touring or more spirited performance driving.

Braking and tire systems

CTS-V includes sophisticated braking and tire systems, in partnership with two companies renowned for high-performance technology: Brembo and Michelin. Brembo brakes are at all four corners and include powerful, six-piston calipers in the front and four-piston calipers in the rear.

Slotted and vented rotors enable strong initial braking force while optimizing heat resistance and eliminating fade. The brake rotors from Brembo employ a “dual-cast” technology that combines cast iron and aluminum, resulting in excellent performance and weight reduction. CTS-V also includes an electric parking brake, enabling more legroom for the driver, key for high-performance driving.

Michelin partnered with Cadillac engineers to develop its acclaimed Pilot Sport PS2 summer tire for CTS-V and its exclusive 19-inch alloy wheels. The tires support high levels of grip in track conditions, while also affording good performance on the road.

Interior amenities

Recaro performance driving seats are optional in the CTS-V Coupe and provide excellent support for spirited driving. These 14-way adjustable performance seats include pneumatic bolster controls in the seat cushions and backrests.

The CTS-V Coupe also includes an exclusive new Saffron color option for the interior, providing a contrasting color accent carried on the seat inserts, as well as the stitching, which highlights the craftsmanship of the instrument panel, center console, door trim and seats.

The steering wheel, seat inserts and shifter are covered in microfiber, providing the luxurious character of suede without suede’s inherent drawbacks of difficult care and moisture sensitivity. These accents are standard, elegant to the touch and help support high-performance driving.

The car’s integrated center stack is trimmed in Obsidian black material that is also applied to the center console and door trim. Just like every CTS, the V-Series includes a hand-stitched instrument panel, door trim and center console. Leading-edge infotainment features extend to the V-Series. They include a 40-gigabyte hard drive, advanced navigation system with a deployable screen and Bose digital surround audio, as well as factory-installed Bluetooth phone integration, all standard features on the V-Series.


source : Cadillac Press